Skip to navigation
Double Pipe Portal with C-126 and C-212 Caps

Double Pipe Portal with C-126 and C-212 Caps

Assets/Details

Submittal Data (342 KB, PDF)
  • Furnish and install the Portals Plus Double Pipe Portal at all points where up to two pipes .375" - 1" in diameter, up to two pipes 1" - 2" in diameter and one pipe 2" - 6" in diameter penetrate the roof.
  • The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. 
  • The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched holes and molded sealing rings on two 8" collared openings.
  • Two EPDM (Ethylene Propylene Diene Monomer) compression molded caps model C-126 & C-212 shall be utilized. 
  • All Caps shall include Portals Plus' stainless steel Snaplock Clamps. 
  • Attachment and installation of the Pipe Portal shall be done in accordance with Portals Plus' instructions and the roofing membrane manufacturer's recommendations. 

RC-2A_Double RC-3A_Double RC-4A_Double

Part #Description QTY/CTN
36002DOUBLE COVER & CAPS W/ C-126 & 212 BLACK CAPS2
32161DBL RC-2A STRAIGHT SIDED CURB - 11" HIGH1
38161DBL RC-2A STRAIGHT SIDED CURB - 18" HIGH1
32171DBL RC-3A CANTED CURB - 8" HIGH1
32171DBL RC-3A RAISED CANTED CURB - 9 1/2" HIGH1

Double Pipe Portal with C-126 & C-212 Caps dimensional