Skip to navigation

Shingle Flashings

Flashings for all types of shingle roofs

Portals Plus Shingle Flashings are designed to effectively seal round pipe penetrations, from 1.25" through 4", penetrating shingle roofing systems at up to 40° slopes.  The seal is an elastomeric collar integrally locked into a rigid base which remains flat on the roof.  Bases are available in 24 gauge galvanized steel, .032 mill finish aluminum, and black thermoplastic.  Installation is easy- the Shingle Flashing slips over the pipe and automatically seals to the pipe at the correct roof angle.  Pipes can be all types, including copper, cast iron, plastic, aluminum, and galvanized.  Shingle Flashings are rated to 180°F continuous heat.  Also available is an all elastomeric one piece Shingle Flashing usable to 45° slope and 200°F continous heat.  All Portals Plus Shingle Flashings are listed by UPC, SBC, ANDBOCA- the three major national codes. Shingle Flashings are available to fit the following nominal pipesizes:  1.25" - 1.5", 2", 3", & 4".