Flashings for all types of shingle roofs

Portals Plus Shingle Flashings are designed to effectively seal round pipe penetrations, from 1.25" through 4", penetrating shingle roofing systems at up to 40° slopes. The seal is an elastomeric collar integrally locked into a rigid base which remains flat on the roof. Bases are available in 24 gauge galvanized steel, .032 mill finish aluminum, and black thermoplastic. Installation is easy- the Shingle Flashing slips over the pipe and automatically seals to the pipe at the correct roof angle. Pipes can be all types, including copper, cast iron, plastic, aluminum, and galvanized. Shingle Flashings are rated to 180°F continuous heat. Also available is an all elastomeric one piece Shingle Flashing usable to 45° slope and 200°F continous heat. All Portals Plus Shingle Flashings are listed by UPC, SBC, AND BOCA- the three major national codes. Shingle Flashings are available to fit the following nominal pipe sizes: 1.25" - 1.5", 2", 3", & 4".

 


   
Elastomeric   Galvanized   Thermoplastic

 

GALVANIZED

NEW UPC
PART NUMBER

SIZE

DESCRIPTION

LIST PRICE
PER UNIT

85009

1.25'' - 1.50''

GALVANIZED FLASHING BASE
w/ elastomeric collar

$ 6.40

85019

2''

GALVANIZED FLASHING BASE
w/ elastomeric collar

$ 6.75

85029

3''

GALVANIZED FLASHING BASE
w/ elastomeric collar

$ 7.35

85039

4''

GALVANIZED FLASHING BASE
w/ elastomeric collar

$ 9.50

 

ELASTOMERIC

NEW UPC
PART NUMBER

SIZE

DESCRIPTION

LIST PRICE
PER UNIT

85109

1.25'' - 1.50''

ELASTOMERIC FLASHING BASE
w/ elastomeric collar

$ 5.75

85119

2''

ELASTOMERIC FLASHING BASE
w/ elastomeric collar

$ 6.05

85129

3''

ELASTOMERIC FLASHING BASE
w/ elastomeric collar

$ 7.25

85139

4''

ELASTOMERIC FLASHING BASE
w/ elastomeric collar

$ 9.10

 

ALUMINUM

NEW UPC
PART NUMBER

SIZE

DESCRIPTION

LIST PRICE
PER UNIT

85209

1.25'' - 1.50''

ALUMINUM FLASHING BASE
w/ elastomeric collar

$ 7.60

85219

2''

ALUMINUM FLASHING BASE
w/ elastomeric collar

$ 8.10

85229

3''

ALUMINUM FLASHING BASE
w/ elastomeric collar

$ 9.00

85239

4''

ALUMINUM FLASHING BASE
w/ elastomeric collar

$ 10.80

 

THERMOPLASTIC

NEW UPC
PART NUMBER

SIZE

DESCRIPTION

LIST PRICE
PER UNIT

85309

1.25'' - 1.50''

THERMOPLASTIC FLASHING BASE
w/ elastomeric collar

$ 5.10

85319

2''

THERMOPLASTIC FLASHING BASE
w/ elastomeric collar

$ 5.25

85329

3''

THERMOPLASTIC FLASHING BASE
w/ elastomeric collar

$ 5.35

85339

4''

THERMOPLASTIC FLASHING BASE
w/ elastomeric collar

$ 6.05

Installation Instructions
CAD Page


All information is subject to change without notice. Dimensions and specifications shown are within manufacturing tolerances.
© Copyright Commercial Products Group of Hart & Cooley, Inc., July, 2008. All Rights Reserved.