|
| Pipe Portal System - for one to eight penetrations in one watertight unit. The Pipe Portal System is a versatile, leak proof, and weathertight solution to routing pipes through a roof. The Pipe Portal System is designed to allow both horizontal and vertical pipe movement, yet provide a maintenance-free permanent installation which accommodates penetrations from 3/8" round through 12" round, and, with Portals Plus Adapter Rings, angle irons and square tubes, as well. Compression molded EPDM rubber caps provide the flexible seal at each penetration. Stainless Snaplock Clamps provide an added measure of assurance at each penetration. The flexible EPDM caps are mechanically sealed to the Pipe Portal cover by a double "Weather-Tite Pressure Seal", which consists of two beads formed into the collar of the cover that mate with double grooves molded into the inside of the cap. The curb cover is molded of one piece ultraviolet-resistant ABS plastic and laminated with an acrylic coating for extra protection. This manufacturing process creates exposed materials that are both ozone and ultraviolet resistant with a serviceable temperature range of -40F to +160F. To complete the system, the roof curb is fabricated from heavy 18 gauge galvanized iron with mitered and welded corners and insulated on all four sides. The Pipe Portal System allows roofing membranes and base flashings to be installed in accordance with the National Roofing Contractors Association (NRCA) recommendations. |
 |
PIPE PORTAL® (Cover, Black Cap & Clamps) RC-3A | |||
|
NEW
UPC |
DESCRIPTION |
QTY/CTN |
LIST
PRICE |
|
|
w/
126 BLACK CAP (1 - 2" to 6" pipe) |
5 |
$ 96.80 |
||
|
w/ 182 BLACK CAP (1 - 8" to 12" pipe) |
1 |
$ 154.40 |
||
|
w/ 126
WHITE CAP (1 - 2" to 6" pipe) |
5 |
$ 98.00 |
||
|
SMALL RC-3A CANTED CURB - 8" High |
1 |
$ 104.00 |
||
|
LARGE RC-3A CANTED CURB - 8" High |
1 |
$ 199.00 |
||