Pipe Mounting Pedestal with ER-4A Equipment Rail

SPECIFICATION

Furnish and install the Portals Plus Pipe Mounting Pedestals as manufactured by Portals Plus, Inc., Bensenville, IL, at all necessary pipe support intervals or as shown on drawings. The Pipe Mounting Pedestals shall include a Portals Plus Equipment Rail, 2 feet long, manufactured of 18 gauge galvanized steel in style ER-4A with continuously welded corner seams at miters, factory-installed wood nailer, and 18 gauge galvanized steel cap with continuously welded corner seams and integral drip edge; a single 24" long steel slide channel attached to "U" shaped mounting brackets secured to sides of Equipment Rail with lag bolts supplied; and a 2", 4", or 6" pipe roller assembly with galvanized 18" long continuous threaded rods to give 12" vertical adjustment, a galvanized removable pipe retainer bracket, a cast iron pipe roller, and a lateral adjust spacer bracket for 12" horizontal adjustment. Attachment and installation of the Pipe Mounting Pedestals shall be done in accordance with Portals Plus' instructions, the roofing membrane manufacturer's recommendations, and the plans and specifications.

  

 

ER-4A STYLE EQUIPMENT RAIL BASE

NEW UPC
PART NUMBER

DESCRIPTION

QTY/CTN

LIST PRICE
PER UNIT

34061
34071
34081

PMP-2 - UP TO 2" PIPE (with insulation)
PMP-4 - 2"+ TO 4" PIPE (with insulation)
PMP-6 - 4"+ TO 6" PIPE (with insulation)

1
1
1

$ 299.00
$ 332.00
$ 367.00

CAD Page


All information is subject to change without notice. Dimensions and specifications shown are within manufacturing tolerances.
© Copyright Commercial Products Group of Hart & Cooley, Inc., July, 2008. All Rights Reserved.